HOW TO APPLY VINYL DECALS

3 Parts to a Vinyl Decal

Quick Vinyl Application Tips...
FIRST you need to know each decal has 3 pieces:

1. The top layer is the transfer tape or pre-mask. 
2. The middle layer is the actual vinyl decal. 
3. The waxy bottom layer is the backing that the decal sits on.

These decals come to you all together in three layers.
  • Do not apply in cold weather - adhesive may stick but will lift easily.
  • Do not apply in extreme heat, apply in the shade - vinyl will get very soft and stretch.
  • Do not use alcohol to apply - it will destroy the adhesive.
  • Do not use ice scraper on the sticker/decal - may lift or break pieces off..
  • Do not touch the adhesive backing - oils from your skin will prevent sticking.
  • Do not point high pressure car wash nozzle at the edges of the sticker/decal for a long time
  • Make sure there is no wax or Rain-X products on the glass surface - adhesive may stick but will lift easily.
  • Do not apply wax over graphics, especially if the wax contains any petroleum distillates. 
  • Car washes are safe.

Application Procedures

Below you will find directions for applying your decal to different surfaces.  The directions vary slightly depending on the application.  
Installing vinyl graphics is a simple follow-the-steps process.  Although it takes very little time, it is not something to rush.   With a little concentration and patience you can easily install your vinyl graphics.